-
Cables
- USB Cables
- Audio Cables
- Adapters
-
Accessories
- Power Adapters
- Batteries
- Apparel
-
DIY Parts
- Opamps
- cMoyBB
- Objective2
- ODAC
- Knobs
- Enclosures
Shop
AUDIO TRUE TO SOUND, MADE IN THE USA
Showing results for ""
We can't find anything for ""
The Element We designed The Element to simplify your desktop audio experience. Element's powerful headphone amp, ultra clean USB DAC, and graceful switch are all housed in a precision machined chassis with a comfortable knob. Enjoy seamless transitions between your powered speakers and headphones.
The Element
$349.00
16VAC Power Adapter A 16VAC power adapter for use with The Element, EL DAC, EL Amp, or Atom Amp. One adapter ships free with each amplifier or DAC. Order extras for convenience or use in different regions.
16VAC Power Adapter
$15.99
Machined Objective2-ODAC Rear Plate - AC, USB Jacks Machined aluminum rear panel for adding an ODAC to an Objective2 headphone amplifier. Our panels use a beautiful brushed finish with laser etched artwork. Clear anodizing resists fingerprints.
Machined Objective2-ODAC Rear Plate - AC, USB Jacks
$8.99
USB Cable - Type C to Mini-B OTG This mini-USB cable allows short connection to any mini-USB device. Perfect for connecting to any mini-USB DAC or amplifier.
USB Cable Type C to Mini-B
$4.99
Optical (TOSLINK) Cable A 6ft optical interconnect cable for use with S/PDIF audio sources. Equipped with full-sized TOSLINK connections on both ends. Recommended for OL DAC and EL DAC.
Optical Cable
$4.99
RCA to RCA Cable A gold-plated, male-to-male RCA interconnect cable. Both ends provide white and red (left and right) male RCA connectors.
RCA to RCA Cable
$3.99
Large Rubber Feet for JDS Labs Element - 4 Pack A set of four replacement rubber feet for The Element, EL DAC, or EL Amp. These skid resistant bumpers are custom designed by JDS Labs with an extra large diameter.
Rubber Feet for Element - 4 Pack
$1.99
RCA to 3.5mm Female Adapter, 6in Stereo RCA to 3.5mm Female adapter cable, 6in length. Allows you to turn any RCA output device into a 3.5mm TRS output.
RCA to 3.5mm Female Adapter, 6in
$3.99
Machined Objective2 Rear Panel Machined aluminum rear panel for the Objective2 headphone amplifier. Our panels use a beautiful brushed finish with laser-etched artwork. Clear coating resists fingerprints.
Machined Objective2 Rear Panel
$5.99
The Element - B Stock We designed The Element to simplify your desktop audio experience. Element's powerful headphone amp, ultra clean DAC, and graceful switch are all housed in a precision machined chassis with a comfortable knob. Enjoy seamless transitions between your powered speakers and headphones.
The Element - B Stock
$349.00
$299.00
OL DAC We decided to set the highest bar with OL DAC, by far outperforming ODAC and eclipsing the sea of alternatives beyond just benchmarks. OL DAC's external AC power supply ensures 100% consistent noise performance and its relay muting eliminates power-up transients; while the minimalist USB Edition relies on the same external AC powered design minus relay muting and optical input.
OL DAC
$99.00
EL DAC - B Stock We designed the Element Line for precision fit and function. EL DAC delivers performance far beyond Objective criteria, with full USB Audio Class 2 support, transformer isolated coaxial input, and optical input. Stack with EL Amp for single button switching between headphones and speakers.
EL DAC - B Stock
$249.00
$209.00
Atom Amp Conceived as the next-generation replacement to Objective2, Atom Amp builds on more than a decade of amplifier design evolution at JDS Labs. We've streamlined the amp to include everything our customers have requested without additional configuration or cost. Atom Amp comes fully loaded with a smooth 1/4" headphone jack, gold-plated preamp RCA outputs, and both 3.5mm and RCA inputs. More power. No noise. Front-mounted controls. Atom Amp, our new standard for performance and value in a headphone amp.
Atom Amp
$99.00
EL DAC We designed the Element Line for precision fit and function. EL DAC delivers performance far beyond Objective criteria, with full USB Audio Class 2 support, transformer isolated coaxial input, and optical input. Stack with EL Amp for single button switching between headphones and speakers.
EL DAC
$249.00
EL Amp We designed the Element Line to simplify your desktop audio experience. EL Amp combines the same, powerful amplifier from the JDS Labs Element with a comfortable knob, housed in a precision machined chassis. Enjoy seamless transitions between your powered speakers and headphones.
EL Amp
$279.00
EL Amp - B Stock We designed the Element Line to simplify your desktop audio experience. EL Amp combines the same, powerful amplifier from the JDS Labs Element with a comfortable knob, housed in a precision machined chassis. Enjoy seamless transitions between your powered speakers and headphones.
EL Amp - B Stock
$279.00
$259.00
cMoyBB v2.03R PCB - Rechargeable Single rechargeable cMoyBB v2.03R printed circuit board (PCB) with red solder mask. Bare PCB only; parts and assembly required.
cMoyBB v2.03R PCB - Rechargeable
$3.99
Objective2+ODAC Combo RevB Objective2+ODAC is an Objective2 headphone amp with integrated ObjectiveDAC. This high performance amp+DAC combo ships fully assembled, tested, and ready to use. Includes USB cable.
Objective2+ODAC Rev B
$279.00
OL DAC - B Stock We decided to set the highest bar with OL DAC, by far outperforming ODAC and eclipsing the sea of alternatives beyond just benchmarks. OL DAC's external AC power supply ensures 100% consistent noise performance and its relay muting eliminates power-up transients; while the minimalist USB Edition relies on the same external AC powered design minus relay muting and optical input.
OL DAC - B Stock
$99.00
$92.00
5mm LED - Blue Single 5mm Light Emitting Diode - Luminous Intensity 6000mcd, Peak Wavelength 470nm (blue).
5mm LED - Blue
$0.25
Objective2 Headphone Amplifier Objective2 is an opensource amplifier designed by brilliant engineer NwAvGuy, with emphasis on benchmark performance and low cost. Objective2 arrives fully assembled, hand tested, and ready to enjoy.
Objective2
$129.00
Standalone ODAC, Rev B The Standalone ODAC is a reference grade digital-to-analog converter designed by NwAvGuy and YoyoDyne Consulting. ODAC can be paired with any headphone amplifier, pre-amplifier, or stereo system.
Standalone ODAC Rev B
$149.00
OL Switcher OL Switcher is the solution to your input/output woes, enabling you to route your audio where needed, without fumbling with cables. OL Switcher is a 2 input, 2 output, passively attenuating preamp. Connect a DAC, connect a DAP, connect a headphone amp, and your speaker system.
OL Switcher
$45.00
Subjective3 Equalizer We're all about making listening more enjoyable. Transparent amplifiers and DACs bring perfection, but maybe you itch to tweak your sound. Subjective3 is a fun three-band equalizer, enabling you to customize bass, mids, and highs. Or, switch to Bypass mode to let the sound flow through unaltered. A must for any desktop audio enthusiast.
Subjective3
$99.00
cMoyBB v2.03 Headphone Amplifier We hand assemble each cMoyBB and tweak output power and bass boost for your equipment. Simply specify your headphones during checkout.
cMoyBB
$59.99
CUI PJ-040D Single CUI PJ-040D, DC Jack for the cMoyBB v2.03/2.03R, part J5. Accepts 1.3x3.5mm barrel type DC connectors.
CUI PJ-040D
$1.00
C5D Amplifier+DAC, B-Stock C5D is built for portable users who demand maximum audio quality, exceptionally low noise, sufficient output power, and a super fine volume control to handle sensitive headphones and IEMs
C5D
$249.00
$199.00
DIY Jack Kit for cMoyBB v2.03 A do-it-yourself kit for the cMoyBB 2.03/2.03R, containing one each of: J1, J2, J3, J4, and J5. PCB and other parts not included.
DIY Jack Kit for cMoyBB v2.03
$7.45
Objective2 DIY Kit Kit containing all components to electrically assemble an Objective2 PCB: all standard resistors, capacitors, jacks, connectors, ICs, and circuit board. No battery, knob, or enclosure. Soldering required.
Objective2 DIY Kit
$59.00
JDS Labs 3.5mm Interconnect Cable Stereo 3.5mm to 3.5mm interconnect cable. This no-frills cable connects your audio source to any analog or auxiliary input.
JDS Labs 3.5mm Cable
$2.99
JDS Labs Premium 3.5mm to 6.35mm (1/4in) Adapter A gold plated, stereo 3.5mm to 6.35mm (1/4in) adapter. Perfectly converts headphones to 1/4in termination, with no loss of signal quality. Snaps onto any 3.5mm TRS cable for maximum compatibility.
JDS Labs 1/4in Adapter
$4.99
BrownDog SO-8 to DIP-8 Adapter Adapts one SOIC-8 surface mount, dual opamp IC to 8-pin DIP package. Useful for evaluating opamps in non-DIP pacakges. Requires soldering of an SOIC-8 dual opamp.
BrownDog SO-8 to DIP-8 Adapter
$4.49
Ultra Short 3.5mm Interconnect Cable An ultra short 3.5mm interconnect cable, perfect for connecting portable audio devices.
Ultra Short 3.5mm Interconnect Cable
$4.99
Aluminum Knob, 0.5in Single polished aluminum knob with a 6mm shaft. Fits any potentiometer with a 0.25-inch shaft diameter.
Aluminum Knob, 0.5in
$6.49
3 Band Equalizer DIY Kit This DIY kit contains all electronics and enclosure materials to assemble a 3-Band Equalizer. The printed circuit board is partially assembled. Simply solder the included capacitors, potentiometers, and jacks to complete the circuit, then install in the included enclosure. AC adapter sold separately.
3 Band EQ DIY Kit
$89.00
$69.00
Tenergy 9V NiMH Battery 1PK Single Tenergy Centura 9V, 200mAh, low self-discharge NiMH battery. Perfect for use with Objective2 or cMoyBB!
Tenergy 9V NiMH Battery 1PK
$6.85
Tenergy 9V NiMH Battery 2PK Two pack of Tenergy Centura 9V, 200mAh, low self-discharge NiMH battery. Perfect for use with Objective2 or cMoyBB!
Tenergy 9V NiMH Battery 2PK
$12.95
Analog Devices AD8066ARZ Single, pre-soldered Analog Devices AD8066ARZ dual opamp on a BrownDog DIP-8 adapter socket. Provides rail-to-rail output and up to 35mA output from a single 9V battery! Bright signature.
Analog Devices AD8066ARZ
$18.90
Generic 9V Battery A generic super heavy duty, non-rechargeable 9V battery.
Generic 9V Battery
$1.00
Slip-on 3.5mm Barrel Adapter Converts a standard 5.5mm DC plug to the 3.5mm size used by the cMoyBB v2.03. Slips on and off by hand, no soldering required. Economical way to use an existing power adapter!
Slip-on 3.5mm Barrel Adapter
$3.95
Objective2 Printed Circuit Board Bare printed circuit board for the Objective2 headphone amplifier. PCB is electrically tested! Objective2 is an open source amplifier designed by NwAvGuy, with emphasis on benchmark performance and low cost.
Objective2 Printed Circuit Board
$5.99
Objective2 Assembled PCB Ready to use Objective2 headphone amplifier circuit board. Objective2 is an open source amplifier designed by NwAvGuy, with emphasis on benchmark performance and low cost. Enclosure, knob, and AC adapter not included.
Objective2 Assembled PCB
$99.00
Machined Objective2 Front Panel Machined aluminum front panel for the Objective2 headphone amplifier. Our panels use a beautiful brushed finish with laser-etched artwork. Clear coating resists fingerprints.
Machined Objective2 Front Panel
$8.99
3mm LED - Red Single 3mm Light Emitting Diode - Luminous Intensity 5000mcd, Peak Wavelength 630nm (Red).
3mm LED - Red
$0.25
Adhesive Bumpers - 4 Pack A four pack of 7.9 x 2.2mm adhesive bumpers. Attach to the bottom of your amplifier for skid-resistant mounting.
Adhesive Bumpers - 4 Pack
$1.50
ODAC (ObjectiveDAC) The ObjectiveDAC (ODAC) is a high performance DAC designed by NwAvGuy and Yoyodyne Consulting. Includes USB cable. Latest model, RevB.
ODAC (ObjectiveDAC)
$99.00
12VDC Power Adapter for 9V cMoyBB A 12VDC power adapter for use with our cMoyBB v2.03 1x9V headphone amplifiers. Only for use within North America.
12VDC Power Adapter
$13.99
Machined Objective2-ODAC Rear Plate - USB Jack Machined aluminum rear panel for adding an ODAC to an Objective2 headphone amplifier. Our panels use a beautiful brushed finish with laser etched artwork. Clear anodizing resists fingerprints.
Objective2-ODAC Rear Plate - USB Jack
$8.99
Nylon Screw Kit for Objective2+ODAC Nylon screw kit for mounting an ODAC to an existing Objective2 circuit board, to create an Objective2+ODAC combo.
Nylon Screw Kit for Objective2+ODAC
$1.25
3.5mm Jack for ODAC Line Output A single 3.5mm, surface mount (SMT) audio jack for use with the optional standalone line-output of the ODAC.
3.5mm Jack for ODAC Line Output
$2.25
3.5mm to RCA Cable, 3ft Stereo 3.5mm to RCA cable, 3ft length. Male RCA connectors allow direct connection of a 3.5mm output device to an RCA input device.
3.5mm to RCA Cable, 3ft
$5.25
Machined Objective2-ODAC Rear Plate - USB, 3.5mm Jacks Aluminum rear panel for adding an ODAC with 3.5mm line-level output to an Objective2 headphone amplifier. Machined and laser engraved from stock B2-080BK endplates.
Objective2-ODAC Rear Plate - USB, 3.5mm Jacks
$8.00
Endplate Kit for ODAC A set of replacement endplates for our ODAC enclosure. Includes front and rear endplates with screws.
Endplate Kit for ODAC
$10.75
Mini-USB Cable A premium mini B USB cable. Gold plated connectors and ferrite core reject noise and ensure clean power and data delivery. Recommended for use with DACs and other devices sensitive to noise.
Mini-USB Cable
$2.99
Texas Instruments TLE2426CLP Single Texas Instruments TLE2426CLP virtual ground IC for the cMoyBB.
Texas Instruments TLE2426CLP
$2.75
Adapter - Stereo 6.35mm to 3.5mm (1/8in) Adapter to convert stereo 6.35mm (1/4in) plugs to 3.5mm (1/8in). Allows use of 1/4in headphone cables with 3.5mm audio jacks.
Adapter - 6.35mm to 3.5mm
$1.99
cMoyBB DIY Kit, Standard Kit containing all components to electrically assemble a cMoyBB v2.03: all standard resistors, capacitors, jacks, connectors, ICs, and circuit board. No battery, knob, or enclosure. Soldering required.
cMoyBB DIY Kit, Standard
$39.00
cMoyBB DIY Kit, Rechargeable Kit containing all components to electrically assemble a cMoyBB v2.03R: all standard resistors, capacitors, jacks, connectors, ICs, and circuit board. No battery, knob, or enclosure. Soldering required.
cMoyBB DIY Kit, Rechargeable
$42.00
JRC NJM4556AD Single JRC NJM4556AD dual opamp in DIP-8 package. Standard opamp used in Objective2 output stage.
JRC NJM4556AD
$1.25
Black Knob with Green Stripe Single black knob with 6mm shaft diameter. Easily pushes onto any 1.4in (6mm) potentiometer shaft. Great low cost knob for Objective2 or cMoyBB.
Black Knob with Green Stripe
$1.49
Aluminum Case for C5, C5D, or ODAC An aluminum enclosure designed to accommodate any circuit board with a width of 58.0mm. This case is used for C5, C5D, and ODAC.
Aluminum Case for C5, C5D, or ODAC
$15.99
Micro to Mini USB OTG Cable A micro-to-mini USB OTG cable. This cable allows direct connection of a mini-USB DAC to most Android devices. Available in 8cm or 100cm lengths.
Micro to Mini USB OTG Cable
$3.99
Mini-USB Cable, 8cm This mini-USB cable allows short connection to any mini-USB device. Perfect for connecting to any mini-USB DAC or amplifier.
Mini-USB Cable, 8cm
$2.99
Allen Wrench - 1/16in SAE A 1/16in allen wrench (or hex key). Perfect match for Kilo International knobs.
Allen Wrench - 1/16in SAE
$0.99
Neutrik 1/4in Stereo Jack A stereo, non-switched 1/4in (6.35mm) audio jack, useful for DIY headphone amplifier projects.
Neutrik 1/4in Stereo Jack
$1.89
Isolated 2.1x5.5mm Power Jack A barrel style power jack for 2.1x5.5mm plugs. Plastic exterior is fully isolated from both terminals, so the jack can be used without impacting chassis grounding.
Isolated 2.1x5.5mm Power Jack
$2.99
Aluminum Enclosure for Objective2 Standard black enclosure for use with the Objective2 headphone amplifier. DIY assembly required.
Aluminum Enclosure for Objective2
$13.99
Machined Objective2 Front Panel - No Power Alternative front panel for the Objective2 headphone amplifier. This modified plate omits the front mounted power jack.
Machined Objective2 Front Panel - No Power
$8.99
Machined Objective2 Rear Plate for AC Jack Alternative rear endplate for the Objective2 headphone amplifier. This modification moves Objective2's power jack to the rear side of the enclosure.
Machined Objective2 Rear Plate for AC Jack
$7.99
Machined Objective2-ODAC Rear Plate - USB, 3.5mm, AC Jacks An aluminum rear plate for assembly of an Objective2+ODAC with rear mounted AC power jack and 3.5mm DAC line-output jacks.
Objective2-ODAC Rear Plate - USB, 3.5mm, AC Jacks
$8.99
Machined Objective2 Front Panel - 1/4in Headphone, No Power, No Input Alternative front panel for the Objective2 headphone amplifier. This modified plate accommodates a 6.35mm (1/4in) headphone jack and omits the front mounted power jack.
Machined Objective2 Front Panel - 1/4in Headphone, No Power, No Input
$8.99
Machined Objective2-ODAC Rear Plate - USB, AC, RCA Jacks Alternative rear plate for Objective2+ODAC. This modification accommodates a rear mounted AC power jack and RCA DAC line-output jacks.
Machined Objective2-ODAC Rear Plate - USB, AC, RCA Jacks
$8.99
Machined Objective2 Front Panel - 1/4in Headphone, No Power Alternative front panel for the Objective2 headphone amplifier. This modified plate accommodates a 6.35mm (1/4in) headphone jack and omits the front mounted power jack.
Machined Objective2 Front Panel - 1/4in Headphone, No Power
$8.99
RCA Jacks - Pair Gold Plated Pair of gold-plated RCA jacks. Includes one white and one red jack, with hardware.
RCA Jacks - Pair Gold Plated
$7.50
Machined Objective2 Rear Plate - RCA and AC Jacks Alternative rear endplate for the Objective2 headphone amplifier. This modification moves Objective2's power jack to the rear side of the enclosure; the front 3.5mm jack is replaced with rear RCA jacks.
Machined Objective2 Rear Plate - RCA and AC Jacks
$8.99
Machined Objective2 Front Plate - No Power or Input Alternative front panel for the Objective2 headphone amplifier. This modified plate omits the front mounted power jack.
Machined Objective2 Front Plate - No Power or Input
$8.99
JRC NJM2068D Single JRC NJM2068D or NJM2068DD dual opamp in DIP-8 package.
JRC NJM2068D
$0.80
JRC NJM2903D Single JRC NJM2903D dual opamp in DIP-8 package.
JRC NJM2903D
$0.75
15VAC Power Adapter A 15VAC power adapter for use with all Objective2, Objective2+ODAC, OL DAC, and EL DAC amplifiers and DACs.
15VAC Power Adapter
$14.99
Adapter - Basic Stereo 3.5mm to 6.35mm (1/4in) A gold plated, stereo 3.5mm to 6.35mm (1/4in) adapter. Perfectly converts headphones to 1/4in termination, with no loss of signal quality. Snaps onto any 3.5mm TRS cable.
Adapter - Basic Stereo 3.5mm to 6.35mm (1/4in)
$0.99
Objective2+ODAC Combo RevB - B Stock Objective2+ODAC is an Objective2 headphone amp with integrated ObjectiveDAC. This high performance amp+DAC combo ships fully assembled, tested, and ready to use. Includes USB cable.
Objective2+ODAC RevB - B Stock
$279.00
$239.00
Objective2 Headphone Amplifier - B Stock Objective2 is an opensource amplifier designed by brilliant engineer NwAvGuy, with emphasis on benchmark performance and low cost. Objective2 arrives fully assembled, hand tested, and ready to enjoy.
Objective2 - B Stock
$129.00
$99.00
JDS Labs T-Shirt, Gray Gray JDS Labs T-Shirt
JDS Labs T-Shirt, Gray
$12.99
JDS Labs T-Shirt, Red Red JDS Labs T-Shirt
JDS Labs T-Shirt, Red
$12.99
JDS Labs T-Shirt, Navy Blue Black JDS Labs T-Shirt
JDS Labs T-Shirt, Navy Blue
$12.99