Please reach out to jdslabs.com/support for bulk orders. Thank you!

Objective2 Printed Circuit Board

Objective2


$5.99

In Stock

Bare printed circuit board for the Objective2 headphone amplifier. PCB is electrically tested! Objective2 is an open source amplifier designed by NwAvGuy, with emphasis on benchmark performance and low cost.


Overview

Bare printed circuit board for the Objective2 headphone amplifier. PCB is electrically tested! Objective2 is an open source amplifier designed by NwAvGuy, with emphasis on benchmark performance and low cost.

Please refer to NwAvGuy's Objective2 Details article for the bill of materials and assembly resources. You are responsible for obtaining all components and assembling the PCB. JDS Labs provides no support for the Objective2 design.

E-Testing: We require electrical-testing of all of our PCBs. Many DIY circuit boards are not e-tested, leaving a 1-5% chance of circuit defects. E-testing slightly raises PCB cost, but tested boards ensure problems are never caused by the circuit board itself!

Dimensions

  • Model Objective2 v1.1b
  • Dimensions 3.94" x 3.15" x 0.062"
  • PCB Composition 2-Layer FR4 HAL
  • PCB Soldermask Black or Green
  • License CC BY-ND 3.0

Instructions & Guides